High performance BiFeO3 ferroelectric nanostructured photocathodes

摘要

Ferroelectric materials may be used as effective photoelectrocatalysts for water splitting due to enhanced charge carrier separation driven by their spontaneous polarization induced internal electric field. Compared to other ferroelectric materials, BiFeO3 exhibits a high catalytic efficiency due to its comparatively smaller bandgap, which enables light absorption from a large part of the solar spectrum and its higher bulk ferroelectric polarization. Here, we compare the photoelectrochemical properties of three different BiFeO3 morphologies, namely, nanofibers, nanowebs, and thin films synthesized via electrospinning, directly on fluorine-doped tin oxide (FTO) coated glass substrates. A significant photocathodic current in the range from -86.2 to -56.5 mu A cm(-2) at -0.4 V bias (vs Ag/AgCl) has been recorded for all three morphologies in 0.1M Na2SO4 aqueous solution (pH = 6.8). Among these morphologies, BiFeO3 nanofibers exhibit higher efficiency because of their larger surface area and improved charge separation resulting from rapid diffusion of photoinduced charge carriers along the axis of the nanofiber. In the case of BiFeO3 nanofibers, we obtained the highest photocurrent density of -86.2 mu A/cm(2) at -0.4 V bias (vs Ag/AgCl electrode) and an onset potential of 0.22 V. We also observed that the onset potential of the photocathodic current can be increased by applying a positive polarization voltage, which leads to favorable bending of band edges at the electrode/electrolyte interface resulting in increased charge carrier separation. Published under license by AIP Publishing.