首页> 外文期刊>IAWA Journal >S2 orientation of microfibrils in softwood tracheids and hardwood fibers.
【24h】

S2 orientation of microfibrils in softwood tracheids and hardwood fibers.

机译:软木气管和硬木纤维中微纤维的S2取向。

获取原文
获取原文并翻译 | 示例
       

摘要

In this study, the soft-rot method was applied to measure the variation of microfibril angle (mfa) in loblolly pine (Pinus taeda), black cherry (Prunus serotina), sugar maple (Acer saccharum) and canelo (Drimys winteri). For loblolly pine and black cherry, measurements of the radial wall indicated a gradual decrease in mfa across the earlywood portion of the growth ring, with an abrupt decrease at the latewood zone for pine, and in contrast only a slight decrease in microfibril angle across an annual ring of black cherry. In loblolly pine, microfibril angle measurements indicated that the average microfibril angle in radial sections was very similar to the average for tangential sections of the same block. The average microfibril angles in the intermediate plane, or cell corner, were statistically similar to that of the tangential and radial plane, for pine, cherry, and maple. In canelo, microfibril angles in radial sections were significantly larger than in tangential and intermediate sections. In pine latewood, the microfibril angles were less than the average mfa for the entire ring, and the earlywood microfibril angles were greater than the average mfa of the entire ring, thus the average mfa for the growth ring did not represent actual measured mfa values..
机译:在这项研究中,软腐方法被用来测量火炬松(Pinus taeda),黑樱桃(Prunus serotina),糖枫(Acer saccharum)和卡内洛(Drimys winteri)的微纤丝角(mfa)的变化。对于火炬松和黑樱桃,放射状壁的测量结果表明,在年轮的早材部分的mfa逐渐减小,在松材的晚材区域突然减小,相反,在松材的微木角仅稍有减小。黑樱桃的年轮。在火炬松中,微纤丝角的测量结果表明,径向切片的平均微纤丝角与同一块切向切片的平均值非常相似。对于松树,樱桃树和枫树树,中间平面(或细胞角)中的平均微纤丝角在统计上类似于切向和径向平面的微纤丝角。在卡内洛,径向部分的微原纤维角明显大于切向和中间部分。在松木晚材中,微纤维角小于整个环的平均mfa,早材微纤维角大于整个环的平均mfa,因此年轮的平均mfa并不代表实际测得的mfa值。 。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号