Enhancing the sustainability of high strength concrete in terms of embodied energy and carbon emission by incorporating sewage sludge and fly ash

摘要

This paper discusses the properties of dried sewage sludge (SS) and its influence on the microstructure development of HVFA concrete when used as a partial replacement of binder material. A detailed characterization of dried sludge samples collected from a sewage treatment plant is carried out using XRF, XRD, TGA, and FTIR techniques. HVFA concrete mix is designed for 50 MPa with 50 fly ash of the total binder content. Sludge is ground to a particle size of 150 mu and 75 mu and replaced at levels of 5, 10, and 15 of the total binder content. The strength activity index of the dried sludge sample is acceptable as per standards. Taking concrete mixes with HVFA as a reference, the fresh properties of binder paste and concrete with sewage sludge have been studied. Mechanical properties that define the applicability to various infrastructure projects are reported for all the studied mixes. EI, CI, COST per unit compressive strength for all mixes are also determined to comment on the environmental impact of the use of SS in concrete. The compressive strength of concrete specimens decreases with the increase in replacement level of SS. However, in comparison with OPC concrete, 75 mu m SS at 5 replacement level concrete mechanical strength is within the acceptable limit for M50 concrete mix. The addition of SS as a binder to the concrete has a lower environmental impact, embodied energy, CO2 emission, and cost per unit strength. But more than 10 replacement level resulted in reducing CS, FS, and STS by 11.17, 6.23, and 6.99. GRAPHICS .