Thickness shear mode (TSM) resonators consisting of metal films and quartz plates are widely used for sensor applications such as film thickness monitoring, force sensors, and odor sensors. However, the current sensor geometry prevents further improvements in its sensitivity and stability. Thinning the plate is necessary for high sensitivity, and advanced fabrication technologies are required for their commercialization. The solution is to use a support substrate to increase the mechanical strength, which can guide the transmittance of the electric field. Herein, we report a TSM resonator bonded to a support substrate. An AT-cut quartz resonator with a floating electrode on the top side was bonded to the support substrate. Two excitation electrodes were placed under the substrate. The support substrates evaluated in this study included borosilicate glass, Z-cut quartz crystals, and AT-cut quartz crystal plates. The quartz crystal resonator (QCR) bonded to the AT-cut quartz crystal plate and positioned at 90 degrees to the crystallographic x-axis shows an excellent temperature coefficient of frequency of -60 6 14 ppb/degrees C for a temperature range 11-40 degrees C. The proposed method reduces temperature sensitivity to 1/4 or less compared to that without a substrate. Furthermore, the resonator could be used as a quartz crystal microbalance. The proposed method may inspire further high-frequency QCR-based biochemical chips or various sensor applications with TSM resonators.
展开▼
