Experimental study on the low-velocity impact response of inter-ply S2-glass/aramid woven fabric hybrid laminates

摘要

This paper presents an experimental evaluation of the effect of hybridization and stacking sequence on the low-velocity impact response of aramid/S2-glass/epoxy hybrid laminates. Plain-weave Kevlar (R) 29 and satin S2-glass fabrics were used and the laminates were manufactured by vacuum infusion moulding. Eight laminate configurations were studied, including two single-fibre samples (pure aramid or pure S2-glass) and six interply hybrids. Low-velocity impact tests were performed with three different impact energies (19 J, 37 J, 72 J) and significant variations in impact behaviour were observed among the laminates. Response Surface Methodology (RSM) was employed to investigate the effect of hybridization on impact performance, focusing on greater absorbed energy and smaller back face deformation. Hybridization led to significant changes in failure morphology and the combination of aramid and S2-glass laminates enhanced the impact performance, especially for up to 49.5 J impact energy, while the pure S2-glass laminate performed better for higher impact energies.