Tribological Characteristics and Wear Features of Powder Tin Bronze with the Addition of Ultrafine Oxides

摘要

The effect of the introduction of ultrafine particles of alumina, nickel oxides and a mixture of their oxides on the mechanical and tribological properties, structure and wear characteristics of powder tin bronze is studied. The increase in the content of alumina from 2 to 5 wt % leads to a decrease in strength by 1.2-1.4 times, and from 5 to 10 wt % it does not affect the change in the tensile strength of powder bronze and leads to a slight decrease in the compressive strength. With an increase in the alumina content from 2 to 10%, the coefficient of friction and the wear rate of powder bronze decrease, and the seizure pressure increases. The addition of nickel oxide to alumina promotes the formation of a homogeneous structure, lower porosity and smaller pore size, an increase in strength, a decrease in coefficient of friction of powder bronze from 0.028 to 0.022, by 2.5 times of wear rate, as well as an increase in seizure pressure from 4 to 7.0 MPa.