Much of the world's essential infrastructure is built along congested coastal belts that are composed of highly compressible and weak soils up to significant depths. Soft alluvial and marine clay deposits have very low bearing capacity and excessive settlement characteristics, with obvious design and maintenance implications on tall structures and large commercial buildings, as well as port and transport infrastructure. Stabilising these soft soils before commencing construction is essential for both long term and short term stability. Pre-construction consolidation of soft soils through the application of a surcharge load alone often takes too long, apart from which, the load required to achieve more than 90% consolidation of these mostly low lying, permeable, and very thick clay deposits can be excessively high over a prolonged period. A system of vertical drains combined with vacuum pressure and surcharge preloading has become an attractive ground improvement alternative in terms of both cost and effectiveness. This technique accelerates consolidation by promoting rapid radial flow which decreases the excess pore-pressure while increasing the effective stress.
展开▼
