Palladium-doped activated carbon fibers are being evaluated as candidate materials for enhanced hydrogen storage at near ambient conditions.Pd-doped fibers were spun using a Pd salt mixed with an isotropic pitch precursor.Experimental techniques such as in situ X-ray analysis,thermogravimetric studies,scanning transmission electron microscopy and gas adsorption were employed to understand how processing conditions for the production of Pd-doped activated carbon fibers affect the microstructure,pore development,and dispersion of metal particles throughout the fibers.The results showed that PdO phase is present in the stabilized fibers and that this oxide phase is stable up to about 250°C.The oxide phase transforms into Pd metal with increasing heat treatment temperature,going through the formation of an intermediate carbide phase.Sintering of Pd particles was observed with heat treatment at temperatures over 750°C.It was also found that pore development during physical activation with CO2 was not significantly affected by the presence of Pd particles within the fibers.
展开▼
