To perform a pipeline bore as efficiently as possible beneath a busy West Texas highway, Hard Rock Directional Drilling decided to use a drill on each side of a planned intersection near the middle of the bore. The Vermeer D 1000x900 was set up on the Midland side of the bore path, and on the exit side, the crew used a Vermeer D500x500. The drills were outfitted with 8-inch (20.3-cm) mud motors and 123/4-inch (32.3-cm) bits to get the pilot bore through sandstone and limestone. At an average depth of 60 feet (18.3 m), it took 12 days for crews to complete the initial bore.
展开▼