Recent noise at work regulations in the EU (2003) have been established to prevent noise induced hearing loss (NIHL). This imposes better performance results to traditional feedback active noise control (ANC) in motorcycle helmets, which suffer from well known limitations. Here two new ideas are applied to this problem. First, an hybrid (feedforward/feedback) linear time invariant (LTI) controller is designed for a motorcycle helmet ANC, which improves the resulting attenuation. This is achieved by adding an extra pair of microphones which measure the external noise that is then used as the feedforward input signal. In addition and to increase even more the resulting performance, the air velocity is measured in real-time and used as the parameter which schedules a linear parameter varying (LPV) feedback (FB) controller. This is combined with the previous feedforward (FF) controller, resulting in a time-varying hybrid controller. Both hybrid, LTI and LPV controllers are designed using linear matrix inequality (LMI)-based optimization. Two experiments have been carried out to measure the relation between external noise spectra and velocity: a wind tunnel test and a freeway ride experience. The resulting controllers are tested in a simulation which uses actual data obtained from the freeway experiment. The resulting attenuations in this motivating study seem promising for future controller tests to be performed in real-time, with the adequate hardware.
展开▼
