Improving the Performance of Direct-Conversion SDRs for Radiated Precompliance Measurements

摘要

In this letter, a highly linear front end to improve the performance of software-defined radio (SDRs) for radiated precompliance measurements is presented. In CISPR band C/D, the test receiver needs to fulfill stringent requirements for using the quasi-peak detector. Usually, an expensive preselection filter bank is necessary to make fully compliant measurements of broadband transients. Direct-conversion-based SDRs show a limited out-of-the-box performance for precompliance measurements caused by, e.g., harmonic mixing and saturation effects. With the use of a triple-balanced mixer, a highly linear upconversion stage is built, eliminating the need for a filter bank. The dynamic range (DR) requirements for the SDR are strongly reduced by a narrowband intermediate frequency filter, making CISPR 16-1-1 compliant measurements possible. The sensitivity of the front end is comparable to professional receivers on the market, although no low-noise amplifier is implemented. The performance is verified by continuous wave (CW) and transient signals according to CISPR norms. The broadband measurement results are compared with traditional characterizations of the DR using the compression level and the noise figure. It shows that assumptions on the RF-link budget for a compliant design can be made with CW measurements. Based on our results, the requirements for the SDR front end are derived.