Activated Carbon Monoliths by Pressureless Technique for Environmental Applications

摘要

Carbon monoliths have been prepared through simple procedure by carbonization in inert atmosphere at 550 C from commercial activated carbon and from unburned carbon in it ykste bctgasse fly asb; US nig, In 0 different kin dS phenolic resin binders. The bagasse fly ash was collected ft on; sugar mills where bagasse is used as a biomass based fuel for cogeneration. Commercial actuated carbon based monoliths whet -e 5 and 10 wt % of the actuated carbon had been replaced by iron oxide (hematite) were dic0 prepared. Results indicate that BET sutfac:e area decreases upon carbonization and loading of hematite. Scanning electron microscopy studies shows that the iron oxide is well distributed over the monoliths and X-ray diffraction shows that it is reduced to magnetite during carbonization. Temperature programmed reduction eAperintents show that the iron oxides on the monoliths are redox active. The monoliths based on commercial activated carbon show 80% remotwl of phenol in dihtted phenol based water solutions whereas unburned carbon derived monoliths showed 5-/ % removal in similar solution. (C) 2015 American Institute of Chemical Engineers Environ Prog, 34: 1420-1426, 2015