首页> 外文期刊>Applied Catalysis, A. General: An International Journal Devoted to Catalytic Science and Its Applications >Synthesis of Mo/V mixed oxide catalysts via crystallisation and spray drying-a novel approach for controlled preparation of acrolein to acrylic acid catalysts
【24h】

Synthesis of Mo/V mixed oxide catalysts via crystallisation and spray drying-a novel approach for controlled preparation of acrolein to acrylic acid catalysts

机译:通过结晶和喷雾干燥合成Mo / V混合氧化物催化剂-一种可控制的丙烯醛制备丙烯酸催化剂的新方法

获取原文
获取原文并翻译 | 示例
           

摘要

Technical catalysts for partial oxidation of acrolein to acrylic acid are based on Mo/V mixed oxides.Different preparation steps are characterised starting from solutions of ammonium-heptamolybdate and -metavanadate.These were dried,employing spray drying and Crystallisation method followed by calcination.The materials formed at each preparation step were studied using X-ray powder diffraction,thermal decomposition,TG/DTA-MS and temperature programmed reduction (with H_2 and acrolein).X-ray diffraction revealed that the drying method affects structural composition of the binary Mo/V-oxides.Spray drying results preferably in a hexagonal MoO_3-type phase,whereas crystallisation leads to V_2O_5-type structure.A correlation of the applied drying method and therefore of structural composition with catalytic performance is discussed by means of TPR investigation comparing the activation process of the two probe molecules H_2 and acrolein.Generally,spray dried samples are more .The preparation variant via spray drying of precursor solution establishes a highly reproducible as well as promising basis for a specific on the genesis of mostly metastable structure parts,which play a crucial role in heterogeneous catalysis.
机译:丙烯醛部分氧化为丙烯酸的工业催化剂是基于Mo / V混合氧化物,其特征在于从七钼酸铵和-甲基钒酸铵的溶液开始,制备了不同的步骤,将其干燥,采用喷雾干燥和结晶法,然后进行煅烧。用X射线粉末衍射,热分解,TG / DTA-MS和程序升温还原(用H_2和丙烯醛)研究了在每个制备步骤中形成的材料。X射线衍射表明,干燥方法会影响二元钼的结构组成喷雾干燥优选在六方形的MoO_3型相中进行,而结晶会导致形成V_2O_5型结构。通过TPR研究比较了所应用的干燥方法及其结构组成与催化性能之间的关系。两种探针分子H_2和丙烯醛的活化过程。通常,喷雾干燥的样品较多。通过对前体溶液进行喷雾干燥得到的n变体为主要是亚稳结构部分的成因建立了高度可再现且有希望的基础,该结构部分在多相催化中起着至关重要的作用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号