Comparison of Co/MgO and Ni/MgO catalysts for the steam reforming of naphthalene as a model compound of tar derived from biomass gasification

摘要

The catalytic performances of 12 wt.% Co/MgO catalyst pre-calcined at 873 K and of Ni catalysts for the steam reforming of naphthalene were investigated. The results of characterizations (TPR, XRD, and CO adsorption) for Ni catalysts showed that Ni metal particles were formed over the catalysts pre-calcined at 873 K with high Ni loading via reduction of NiO-MgO phases. A few Ni metal particles were obtained over the catalysts pre-calcined at 1173 K with all Ni loading values. The catalytic performance data showed that Co/MgO catalyst had higher activity (conv., 23%, 3 h) than any kinds of Ni/MgO catalysts tested in this study, under lower steam/carbon mote ratio (0.6) and higher concentration of fed naphthalene (3.5 mol%) than those used in the other works. The steam reforming of naphthalene proceeded when there was a stoichiometric ratio between the carbon atoms of naphthalene and H2O over Co catalyst; however, the activation of excess H2O happened over the Ni catalyst and this phenomenon can lead to having lower activity than Co catalyst. We concluded that these observations should be attributed to different catalytic performances between Co/MgO and Ni/MgO catalysts. (C) 2004 Elsevier B.V. All rights reserved.