...
首页> 外文期刊>Proceedings of the Institution of Mechanical Engineers, Part E. Journal of Process Mechanical Engineering >Internal leakage analysis and experiment in hydraulic control system of steam turbine inlet valve
【24h】

Internal leakage analysis and experiment in hydraulic control system of steam turbine inlet valve

机译:汽轮机入口阀液压控制系统内部泄漏分析与实验

获取原文
获取原文并翻译 | 示例

摘要

In this paper, the transformation of steam turbine regulating system from mechanical hydraulic regulation to electro-hydraulic regulation is realized. And the internal leakage mechanism of the hydraulic control switch valve and the electro-hydraulic proportional valve in the system is analyzed. With the use of hydraulic simulation software AMESim, the mathematical model of the electro-hydraulic control system after transforming is established. The parameters of the hydraulic control switch valve and the electro-hydraulic proportional valve in the hydraulic control system of steam turbine inlet valve are studied under different internal leakage locations and different leakage degree, such as piston regulating time, steady position of piston, oil pressure and leakage flow flux. The fault characteristic table of internal leakage is obtained. An experimental platform for simulating internal leakage is built. The experimental curves of several physical quantities under different internal leakage conditions are obtained. The experimental results prove that the internal leakage has a great impact on the performance of the electro-hydraulic control system. The results of internal leakage experiment are consistent with those of internal leakage simulation.
机译:本文实现了汽轮机调节系统由机械液压调节向电液调节的转变。分析了系统中液控开关阀和电液比例阀的内部泄漏机理。利用液压仿真软件AMESim,建立了改造后电液控制系统的数学模型。研究了汽轮机进汽阀液压控制系统中的液控开关阀和电液比例阀在不同内漏位置和不同泄漏程度下的参数,如活塞调节时间、活塞稳定位置、油压和泄漏流量。得到了内漏故障特征表。搭建了模拟内泄漏的实验平台。得到了不同内漏条件下几种物理量的实验曲线。实验结果表明,内泄漏对电液控制系统的性能有很大影响。内泄漏实验结果与内泄漏模拟结果一致。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号