...
首页> 外文期刊>Analytica chimica acta >Determination of bismuth and zinc in pharmaceuticals by first derivative UV-Visible spectrophotometry
【24h】

Determination of bismuth and zinc in pharmaceuticals by first derivative UV-Visible spectrophotometry

机译:一阶导数紫外可见分光光度法测定药品中的铋和锌

获取原文
获取原文并翻译 | 示例
           

摘要

A first order derivative spectrophotometric method has been developed for the simultaneous determination of bismuth and zinc by dithizone without time-consuming extraction step.The reactions of bismuth and zinc with dithizone in a three component solution prepared in water,acetone and n-propanol mixture have been investigated.These cations react with dithizone in this mixture at pH 5.0,forming coloured complex that is stable for at least 2 h.The linear range in D evaluation was between 3.0 x 10~(-6) and 1.8 x 10~(-5)mol l~(-1) for Zn and 2.4 x 10~(-6) and 1.2 x 10~(-5) mol l~(-1) for Bi.The limits of detection for the analytical procedure were found 0.05 mg l~(-1) for both cations.The relative standard deviations for the determination of 0.5 mg 1~' bismuth and 0.5 mg l~(-1) zinc were 1.2 and 1.1%,respectively,for five determinations.The procedure is simple,rapid and reliable.This method was applied to the determination of bismuth and zinc in the pharmaceutical materials successfully.Good agreement was achieved between the results obtained by the proposed and comparative methods.
机译:已开发出一阶导数分光光度法,无需萃取步骤即可通过双硫zone同时测定铋和锌。铋和锌与双硫zone在水,丙酮和正丙醇混合物制得的三组分溶液中的反应具有这些阳离子在此混合物中在pH 5.0下与双硫zone反应,形成稳定至少2小时的有色配合物.D评估的线性范围为3.0 x 10〜(-6)至1.8 x 10〜(-锌的5)mol l〜(-1)和Bi的2.4 x 10〜(-6)和1.2 x 10〜(-5)mol l〜(-1)。分析方法的检出限为0.05两种阳离子的测定值均为l(-1)mg。〜(-1),五次测定的相对标准偏差分别为1.2和1.1%,分别为0.5 mg 1〜'铋和0.5 mg l〜(-1)。该方法简便,快速,可靠。该方法已成功地用于药物原料中铋和锌的测定。通过提议的方法和比较方法获得的结果之间达成了一致。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号