首页> 外文期刊>Analytica chimica acta >Investigations of a sol-gel derived stationary phase for open tubular capillary electrochromatography
【24h】

Investigations of a sol-gel derived stationary phase for open tubular capillary electrochromatography

机译:溶胶-凝胶衍生的固定相用于开放式管状毛细管电色谱的研究

获取原文
获取原文并翻译 | 示例
           

摘要

Organic-inorganic hybrid glass composites were synthesized using sol-gel processing. These composites were cast onto the inner walls of fused silica capillaries and used as the stationary phase for open tubular capillary electrochromatography (CYT-CEC). N-octyl sol-gel processed bonded phases were prepared using a mixture of n-octyltriethoxysilane and tetraethoxysilane (C-8-TEOS/TEOS). The synthesis of the sol-gel-processed composite incorporates the stationary phase into the glass formation process. This process consists of hydrolysis and condensation reactions of the C-8-TEOS/TEOS mixture. The chemical species present in solution during the sol-gel process, prior to column casting, dictates the characteristics of the final glass composite. Manipulation of the processing parameters allows control of the retentive properties of the sol-gel-derived phase. A correlation between the species present in solution at the time of column casting and chromatographic retention has been established. The column preparation procedure was optimized for the C8-TEOS/TEOS hybrid system. A phase containing octadecyl (C-18) groups was also fabricated by sol-gel processing. Using a pressurized coating assembly improved the column-to-column reproducibility. The effect of silanizing the sol-gel-derived material was also studied. Such a silanization, however, did not cause appreciable changes on the performance of the capillary columns. (C) 1999 Elsevier Science B.V. All rights reserved. [References: 22]
机译:采用溶胶-凝胶法合成了有机-无机杂化玻璃复合材料。将这些复合材料浇铸在熔融石英毛细管的内壁上,并用作开放式毛细管电色谱(CYT-CEC)的固定相。使用正辛基三乙氧基硅烷和四乙氧基硅烷(C-8-TEOS / TEOS)的混合物制备N-辛基溶胶-凝胶处理的键合相。溶胶-凝胶处理的复合材料的合成将固定相纳入玻璃的形成过程。该过程由C-8-TEOS / TEOS混合物的水解和缩合反应组成。在柱浇铸之前,溶胶-凝胶过程中溶液中存在的化学物种决定了最终玻璃复合材料的特性。加工参数的操纵允许控制溶胶-凝胶衍生相的保持性能。已经建立了在柱铸造时溶液中存在的物质与色谱保留之间的相关性。针对C8-TEOS / TEOS混合系统优化了色谱柱制备程序。还通过溶胶-凝胶法制备了含有十八烷基(C-18)基团的相。使用加压涂层组件可提高色谱柱到色谱柱的重现性。还研究了将溶胶-凝胶衍生的材料硅烷化的效果。但是,这种硅烷化并未对毛细管柱的性能造成明显的变化。 (C)1999 Elsevier Science B.V.保留所有权利。 [参考:22]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号