Tailored mechanical response and mass transport characteristic of selective laser melted porous metallic biomaterials for bone scaffolds

摘要

Porous metallic biomaterials developed from pentamode metamaterials (PMs) were rationally designed to mimic the topological, mechanical, and mass transport properties of human bones. Here, a series of diamond-based PMs with different strut parameters were fabricated from a Ti-6Al-4V powder by selective laser melting (SLM) technique. The morphological features, mechanical properties and permeability of PM samples were then characterized. In terms of morphology, the as-built PMs were well consistent with the as-designed ones, although the slight surface deviations were presented in overhanging areas. The PM scaffolds showed a switchable deformation pattern controlled by the slenderness ratio of struts. The double-cone strut topology increases the tortuosity and thereby accelerates the nutrients supply, waste removal, and cell migration to the whole scaffold region and circumambient bone tissue. The measured mechanical properties (i.e., E: 0.59-2.90 GPa, sigma(y) : 20.59-112.63 MPa) and computational permeability values (k : 9.87-49.19 x 10(-9) m(2)) of PM scaffolds were all in accordance with those of trabecular bone. The experimental permeability values were linearly dependent on the results of simulations. This study showed the great potential of PMs as bone scaffolds. Moreover, we demonstrated that PM-based porous biomaterials can decouple the mass transport and mechanical properties of bone scaffolds, so as to achieve an unprecedented level of tailoring their multi-physics properties.