首页> 外文期刊>ACS applied materials & interfaces >Constructing Alternated Heterobimetallic [Fe(II)/Os(II)] Supramolecular Polymers with Diverse Solubility for Facile Fabrication of Voltage-Tunable Multicolor Electrochromic Devices
【24h】

Constructing Alternated Heterobimetallic [Fe(II)/Os(II)] Supramolecular Polymers with Diverse Solubility for Facile Fabrication of Voltage-Tunable Multicolor Electrochromic Devices

机译:构建交替的偏异性物质[Fe(II)/ OS(II)]超分子聚合物,具有不同的溶解度,可用于容易可调谐多色电致变色器件的外壳制造

获取原文
获取原文并翻译 | 示例
           

摘要

Metallo-supramolecular polymer (MSP)-based electrochromic devices (ECDs) have drawn much attention because of their variable colors and attractive electrochromic (EC) properties. However, fabrication of voltage-tunable multicolor ECDs using single MSP is yet hard to realize. We anticipated alternate introduction of two different redox-active metal ions in an MSP combined with the adjustment of counteranions could be a solution to fabricate multicolor ECDs. The heterometals will induce color variability upon voltage alteration, and counteranions will help to tune the solubility of MSP in different solvents. In an attempt to fulfill this target, we have synthesized four heterobimetallic supramolecular polymers (HBPs) having different counteranions (BF4-, Cl-, PF6-, and OA(c)(-)), in which Fe(II) and Os(II) are alternately complexed by two terpyridine units. To apply as EC material, the HBPs should be soluble in methanol and insoluble in acetonitrile for the preparation of EC film as well as ECDs. However, among the HBPs, only HBP-OAc is found to meet this requirement. The EC behaviors of the spray-coating film of HBP-OAc on an indium tin oxide (ITO)-coated glass substrate are investigated in terms of maximum transmittance contrast, coloration voltage, response time, coloration efficiency, and operational stability, which exhibits reversible multicolor electrochromism (the initial purple color of the film is changed to violet followed by greenish-yellow) upon alteration of the voltage from 0.0 to 0.7 V [required to oxidize the Os(II) ion] and to 1.0 V [required to oxidize the Fe(II) ion]. The film is also integrated into a laminated ECD by using lithium-based gel electrolyte. Finally, as a proof-ofconcept, a prototype voltage-tunable multicolor EC display (6 cm x 2.5 cm) is fabricated by using a designed image containing a flower, leaves, and a flower pot, which exhibits six different types of multicolor image upon application of tunable voltages.
机译:基于可变颜色和有吸引力的电致变色(EC)性质,金属 - 超分子聚合物(MESP)的电致变色器件(ECDS)具有很多关注。然而,使用单个MSP的电压可调多色ECD的制造尚难实现。我们预期在MSP中的两种不同的氧化还原活性金属离子的替代引入结合了对抗的调整可能是制造多色ECD的溶液。异电系数将在电压改变时诱导颜色可变性,并且对抗将有助于调节MSP在不同溶剂中的溶解度。试图满足该靶标,我们合成了具有不同抗衡离子的四种异质物超分子聚合物(HBP)(BF4-,Cl-,PF6-和OA(C)( - )),其中Fe(II)和OS( II)由两种三吡啶单元交替复合。施用作为EC材料,HBPS应溶于甲醇并不溶于乙腈,用于制备EC膜以及ECD。但是,在HBPS中,只发现HBP-OAC符合此要求。在最大透射率对比度,着色电压,响应时间,着色效率和操作稳定性方面,研究了HBP-OAc的喷涂膜的EC行为在氧化铟锡(ITO)涂覆的玻璃基板上。多色电致变色(膜的初始紫色改变为紫色的紫色,然后是绿黄色),在0.0至0.7V [氧化OS(ii)离子的情况下]和1.0V [氧化所需的0.7V] Fe(ii)离子]。通过使用锂基凝胶电解质,薄膜也集成到层压的ECD中。最后,作为概念验证,通过使用包含花,叶子和花盆的设计图像来制造原型电压可调式多色EC显示器(6cm×2.5cm),其展示了六种不同类型的多色图像可调电压的应用。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号