首页> 外文期刊>Chemical Engineering Science >High viscosity polymeric fluid droplet formation in a flow focusing microfluidic device - Experimental and numerical study
【24h】

High viscosity polymeric fluid droplet formation in a flow focusing microfluidic device - Experimental and numerical study

机译:流动聚焦微流体装置中的高粘度聚合物流体液滴形成 - 实验性和数值研究

获取原文
获取原文并翻译 | 示例
       

摘要

Experimental and numerical studies concerning the formation of droplets of a viscous fluid in a less viscous immiscible one (viscosity ratio of 533), containing surfactant, were conducted in a flow-focusing square microchannel. Numerical and experimental data from three flow regimes were analysed: threading, dripping and jetting. The results were analysed qualitatively and quantitatively and also compared to correlations from the literature. The droplet sizes and the thread lengths obtained experimentally deviate from the ones obtained for surfactant free systems reported in the literature. The roles of the surfactant mass transport limitations and of the interface rheology are analysed and discussed. The numerical code, based on a coupled level-set and volume of fluid method, successfully predicts droplets sizes in surfactant free systems in almost all the conditions studied. The limits of the numerical code to accurately predict the size of the droplets, particularly in the monodispersed dripping regime, were established. If surfactant is present, the numerical code fails to predict the droplet size under certain flow conditions. (C) 2018 Elsevier Ltd. All rights reserved.
机译:在流动聚焦的方形微通道中进行了关于含有表面活性剂的较低粘性不混溶的粘性流体液滴液滴的实验和数值研究。分析了三个流动制度的数值和实验数据:穿线,滴水和喷射。定性和定量分析结果,也与文献相关的相关性分析。实验偏离的液滴尺寸和螺纹长度从文献中报道的表面活性剂自由系统获得的螺纹长度。分析并讨论了表面活性剂质量传输限制和界面流变的作用。基于耦合电平集和流体方法的体积的数值代码成功地预测了在几乎所有条件下的表面活性剂自由系统中的液滴尺寸。建立了数值代码的限制,以准确地预测液滴的尺寸,特别是在单分散的滴水状态下。如果存在表面活性剂,则数码未能在某些流动条件下预测液滴尺寸。 (c)2018年elestvier有限公司保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号