...
首页> 外文期刊>CERAMICS INTERNATIONAL >Dielectric and piezoelectric properties of 2-2 connectivity lead-free piezoelectric ceramic Bi0.5Na0.5TiO3/Portland cement composites
【24h】

Dielectric and piezoelectric properties of 2-2 connectivity lead-free piezoelectric ceramic Bi0.5Na0.5TiO3/Portland cement composites

机译:2-2连接无铅压电陶瓷BI0.5NA0.5tio3 /波特兰水泥复合材料的介电和压电性能

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

In this paper, 2-2 connectivity pattern lead-free piezoelectric ceramic Bi0.5Na0.5TiO3/Portland cement composites with approximate to 30-70 vol% of Bi0.5Na0.5TiO3 ceramic has been successfully fabricated. Dielectric and piezoelectric properties of the composites were investigated. The results showed that Bi0.5Na0.5TiO3 ceramic content has an effect on dielectric property of the composite, that is the dielectric constant value increased as Bi0.5Na0.5TiO3 ceramic content increased while the dielectric loss value reduced at higher Bi0.5Na0.5TiO3 ceramic content. The piezoelectric coefficient (d(33)) values of composites obtained were in the range of 48 pC/N to 73 pC/N. Moreover, composite with Bi0.5Na0.5TiO3 ceramic content of approximate to 30 vol% exhibited highest piezoelectric voltage coefficient (g(33)) value of 26.06 mV m/N. Therefore, these promising results showed that the 2-2 connectivity pattern lead-free piezoelectric ceramic Bi0.5Na0.5TiO3/Portland cement composite has the potential to be used as a sensor for structural health monitoring application.
机译:在本文中,2-2连通图案无铅压电陶瓷BI0.5NA0.5tio3 /波特兰水泥复合材料,近似为30-70体积%的BI0.5NA0.5tio3陶瓷已成功制作。研究了复合材料的介质和压电性能。结果表明,Bi0.5na0.5TiO3陶瓷含量对复合材料的介电性质有影响,即介电常数增加,因为Bi0.5na0.5tio3陶瓷含量增加,而介电损耗值在较高的Bi0.5na0.5tio3处减少陶瓷内容。所获得的复合材料的压电系数(D(33))在48pc / n至73pc / n的范围内。此外,具有Bi0.5na0.5tiO3近似为30体积%的陶瓷含量的复合材料表现出最高的压电电压系数(G(33))值为26.06 mV m / n。因此,这些有希望的结果表明,2-2连通图案无铅压电陶瓷BI0.5NA0.5tio3 / Portland水泥复合材料具有用作结构健康监测应用的传感器。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号