首页> 外文期刊>ACS applied materials & interfaces >Investigation of Solution-Processed Ultrathin Electron Injection Layers for Organic Light-Emitting Diodes
【24h】

Investigation of Solution-Processed Ultrathin Electron Injection Layers for Organic Light-Emitting Diodes

机译:有机发光二极管的固溶处理超薄电子注入层研究

获取原文
获取原文并翻译 | 示例
           

摘要

We study two types of water/alcohol-soluble aliphatic amines, polyethylenimine (PEI) and polyethyleni-mine-ethoxylated (PEIE), for their suitability as electron injection layers in solution-processed blue fluorescent organic light-emitting diodes (OLEDs). X-ray photoelectron spectroscopy is used to determine the nominal thickness of the polymer layers while ultraviolet photoelectron spectroscopy is carried out to determine the induced work-function change of the silver cathode. The determined work-function shifts are as high asl.5 eV for.PEI and 1.3 eV for PEIE. Furthermore, atomic force microscopy images reveal that homogeneous PEI and PEIE layers are present at nominal thicknesses of about 11 nm. Finally, we solution prepare blue emitting polymer-based OLEDs using PEI/PEIE in combination with Ag as cathode layers. Luminous efficiency reaches 3 and 2.2 cd A~(-1), whereas maximum luminance values are as high as 8000 and 3000 cd m~2 for PEI and PEIE injection layers, respectively. The prepared devices show a comparable performance to Ca/Ag OLEDs and an improved shelf lifetime,
机译:我们研究了两种类型的水/醇溶性脂肪胺,聚乙烯亚胺(PEI)和聚乙烯亚胺-乙氧基化(PEIE),因为它们适合作为溶液处理的蓝色荧光有机发光二极管(OLED)中的电子注入层。 X射线光电子能谱用于确定聚合物层的标称厚度,而紫外线光电子能谱用于确定银阴极的感应功函数变化。所确定的功函数偏移对于PEI高达5 eV,对于PEIE高达1.3 eV。此外,原子力显微镜图像显示均匀的PEI和PEIE层以约11 nm的标称厚度存在。最后,我们将PEI / PEIE与Ag结合用作阴极层,以溶液方式制备基于蓝光发射聚合物的OLED。发光效率达到3和2.2 cd A〜(-1),而PEI和PEIE注入层的最大亮度值分别高达8000和3000 cd m〜2。所制备的器件显示出与Ca / Ag OLED相当的性能,并改善了保存期限,

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号