...
首页> 外文期刊>Journal of Vinyl & Additive Technology >Radiation Synthesis of Carboxymethyl Cellulose Hydrogels for Removal of Organic Contaminants from Its Aqueous Solution
【24h】

Radiation Synthesis of Carboxymethyl Cellulose Hydrogels for Removal of Organic Contaminants from Its Aqueous Solution

机译:羧甲基纤维素水凝胶中除去有机溶液中的羧甲基纤维素水凝胶的辐射合成

获取原文
获取原文并翻译 | 示例
           

摘要

Preparation of hydrogels based on carboxymethyl cellulose (CMC) using direct radiation grafting technique for removal of organic contaminant such as 4-chlorophenol and 2,4-dichlorophenoxyacetic acid (2,4-D) was carried out. The prepared hydrogels which are composed of individual radiation grafting of methacrylic acid onto CMC to form poly(CMC/MAA) the other hydrogel composed of binary acrylamide/methacrylic acid grafted onto CMC to form poly(CMC/MAA:AAm) hydrogels. The two selected composition poly(CMC/MAA:AAm) (1/60:40 wt%) poly(CMC/MAA) (1:20) wt% hydrogels due to its high chelating properties obtained from our previous work by the same authors. The properties of the selected two prepared hydrogels were evaluated by using different analytical tools such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The gel (%) and the swelling behavior of poly(CMC/MAA:AAm) is higher than poly(CMC/MAAc) hydrogel. It is found that the adsorption capacity of poly(CMC/MAA) hydrogel (1:20 wt%) toward 4-chlorophenol and 2,4 dichlorophenoxy acetic acid was higher than that of poly(CMC/MAA:AAm) (1/60:40 wt%) hydrogel. Also The obtained results showed that the adsorption capacity of both poly(CMC/MAA:AAm) (1/60:40 wt%) and poly(CMC/MAA) (1:20) wt% hydrogels toward 2,4 dichlorophenoxy acetic acid was higher than of 4-chlorophenol. J. VINYL ADDIT. TECHNOL., 26:362-369, 2020. (c) 2019 Society of Plastics Engineers
机译:采用直接辐射移植技术制备基于羧甲基纤维素(CMC)的水凝胶,用于去除有机污染物,例如4-氯苯酚和2,4-二氯苯乙酸(2,4-D)。制备的水凝胶由甲基丙烯酸的单独放射移植到CMC中,以形成聚(CMC / MAA)的其他水凝胶,其它水凝胶与移植到CMC上的二元丙烯酰胺/甲基丙烯酸组成,形成聚(CMC / MAA:AAM)水凝胶。由于其在我们以前的工作中获得的高螯合性能,两种选定的组合物聚(CMC / MAA:AAM)(1/60:40wt%)(1/60:40wt%)(1/60:40wt%)(1/60:40重量%)(1/60:40重量%)(1/60:40重量%)(1:20)Wt%水凝胶。 。通过使用诸如傅里叶变换红外(FTIR),X射线衍射(XRD)和热重分析(TGA)的不同分析工具来评估所选两种制备的水凝胶的性质。聚(CMC / MAA:AAM)的凝胶(%)和溶胀行为高于聚(CMC / MAAC)水凝胶。发现聚(CMC / MAA)水凝胶(1:20wt%)朝向4-氯苯酚和2,4二氯苯氧基乙酸的吸附能量高于聚(CMC / MAA:AAM)(1/60 :40%wt%)水凝胶。所得到的结果表明,聚(CMC / MAA:AAM)(1/60:40重量%)和聚(CMC / MAA)(1:20)(1:20)Wt%水凝胶朝向2,4二氯苯氧基乙酸的吸附能力高于4-氯酚。 J.乙烯基添加剂。 Technol。,26:362-369,2020。(c)2019塑料工程师协会

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号