Initial surface failure and wear of cemented carbides in sliding contact with different rock types

摘要

The initial wear, deformation and degradation of cemented carbide in contact with different rock types are studied using a crossed cylinder sliding test. The sliding distance is limited to centimetres at a time, interrupted by successive SEM analysis. This allows for careful studies of the gradually changing microstructure of the cemented carbide during the test. Five different rock types are included; granite, metal sulphide ore, mica schist, quartzite and marble. All rock types are very different in microstructure, composition and properties. The cemented carbide grade used for the evaluation contains 6 wt% Co and fine (similar to 1 mu m) WC grains, a grade commonly used in rock drilling. The results show that the cemented carbide microstructure becomes altered already during the very first contact with rock. The initial wear rate and wear character is highly influenced by the rock type. The initial wear of the cemented carbide is highest against quartzite and lowest against marble.