...
首页> 外文期刊>Propellants, Explosives, Pyrotechnics >Effects of Charge Size on Slow Cook-Off Characteristics of AP/HTPB Composite Propellant in Base Bleed Unit
【24h】

Effects of Charge Size on Slow Cook-Off Characteristics of AP/HTPB Composite Propellant in Base Bleed Unit

机译:电荷尺寸对基漏装置AP / HTPB复合推进剂缓慢炊具的影响

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

To investigate the effects of charge size on the slow cook-off characteristics of trilobite ammonium perchlorate (AP)/hydroxyl-terminated polybutadiene (HTPB) composite propellant with slits, a cook-off model of three-dimensional base bleed unit is developed based on the two-step decomposition reaction mechanism of AP/HTPB propellant at the external heating rates from 3.3 to 9K/h. The charge length of AP/HTPB propellant is 72mm with 43mm to 53mm in grain diameter, and the grain diameter is 43mm with 72mm to 90mm in charge length, respectively. The results show that heating rate and charge size determine the ignition position of AP/HTPB propellant. The effects of charge size on the ignition position and cook-off temperature are small at the heating rate of 3.3K/h. As the heating rate increases to 4.6K/h-6K/h, with the grain diameter and charge length extending, the ignition position gradually moves from the inner wall to the surface near the slit, meanwhile the cook-off temperature changes obviously. When the heating rate increases to 9K/h, the ignition position of AP/HTPB propellant at different charge sizes all occurs on the outer interface between the propellant and slit, there is no obvious influence of different charge sizes on the ignition temperature of AP/HTPB propellant. Additionally, the law of ignition time of AP/HTPB propellant to charge size is the same at different heating rates.
机译:为了研究电荷尺寸对三氟钴(AP)/羟基 - 封端的聚丁二烯(HTPB)复合推进剂用狭缝的慢蒸馏特性对慢蒸馏特性的影响,基于AP / HTPB推进剂的两步分解反应机制在外部加热速率为3.3至9K / h。 AP / HTPB推进剂的电荷长度为72mm,粒径为43mm至53mm,粒径为43mm,分别为72mm至90mm。结果表明,加热速率和充电尺寸决定了AP / HTPB推进剂的点火位置。充电尺寸对点火位置和炊具温度的影响小于3.3k / h。随着加热速率的增加至4.6k / h-6k / h,随着粒径和电荷长度延伸,点火位置逐渐从内壁到狭缝附近的表面移动,同时炊温温度明显变化。当加热速率增加到9K / h时,AP / HTPB推进剂在不同电荷尺寸的点火位置发生在推进剂和狭缝之间的外界面上,不同电荷尺寸对AP的点火温度没有明显影响/ HTPB推进剂。另外,在不同的加热速率下,AP / HTPB推进剂推进剂的点火时间的定律是相同的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号