...
首页> 外文期刊>Preparative biochemistry & biotechnology: An international journal for rapid communication >Optimization of sodium percarbonate pretreatment for improving 2,3-butanediol production from corncob
【24h】

Optimization of sodium percarbonate pretreatment for improving 2,3-butanediol production from corncob

机译:优化过碳酸钠预处理改善玉米浦2,3-丁二醇产量的预处理

获取原文
获取原文并翻译 | 示例
           

摘要

Sodium percarbonate (SP), a kind of alkaline strong oxidant, was applied to corncob pretreatment. The optimized pretreatment conditions were at 4% (w/v) SP concentration with solid-to-liquid (SLR) ratio of 1:10 treating for 4hr at 60 degrees C. This pretreatment resulted in 91.06% of cellulose and 84.08% of hemicellulose recoveries with 34.09% of lignin removal in corncob. The reducing sugar yield from SP-pretreated corncob was 0.56g/g after 72hr of enzymatic hydrolysis, 1.75-folds higher than that from raw corncob. 2,3-butanediol production by Enterobacer cloacae in simultaneous saccharification fermentation was 29.18g/L using SP-pretreated corncob as a substrate, which was 11.12 times of that using raw corncob. Scanning electron microscope, X-ray diffraction, and Fourier transform infrared spectra analysis indicated that physical characteristics, crystallinity, and structure of corncob had changed obviously after SP pretreatment. This simple and novel pretreatment method was effective for delignification and carbohydrate retention in microbial production of 2,3-butanediol from lignocellulose biomass.
机译:过碳酸钠(SP),一种碱性强氧化剂,应用于玉米杆菌预处理。优化的预处理条件为4%(w / v)Sp浓度,其固体 - 液(SLR)比为1:10,在60℃下处理4小时。该预处理导致91.06%的纤维素和84.08%的半纤维素回收玉米饼中的34.09%的木质素去除。 72小时酶水解后的SP-Preatered玉米芯片的还原糖产量为0.56g / g,比原始玉米浦高1.75倍。 2,3-丁二醇通过Enterobacer Cloacae在同时糖化发酵中产生29.18g / l,使用Sp-PrepReated玉米浦作为基材,其使用原料玉米芯片为11.12倍。扫描电子显微镜,X射线衍射和傅里叶变换红外光谱分析表明,在SP预处理后,玉米衫的物理特性,结晶度和结构明显变化。这种简单和新的预处理方法对于来自木质纤维素生物质的2,3-丁二醇的微生物生产中的脱氨酸和碳水化合物保留是有效的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号