Statistical Analysis of Rock Fracture Toughness Data Obtained from Different Chevron Notched and Straight Cracked Mode I Specimens

摘要

In laboratory fracture toughness studies, the crack growth resistance of rock materials may be influenced by different factors such as specimen geometry, loading conditions, and also the type of pre-notch cut in the test sample. In this paper, a large number of mode I fracture toughness experiments are conducted on an Iranian white rock "Harsin marble" with six different mode I specimens. The selected test specimens are in the shape of cylindrical rod, rectangular beam, and circular Brazilian disk containing either chevron notch or straight crack. The effect of specimen geometry and pre-notch type was investigated statistically, and it was found that the average fracture toughness values of notched specimens were higher than those of the similar specimens but containing straight crack. Meanwhile, the scatters of fracture toughness data for chevron notched specimens were smaller than those for the straight cracked samples. For each set of experimental fracture toughness results, probability of fracture was investigated using two- and three-parameter Weibull statistical distributions. Comparison of the Weibull fitted curves for chevron notched and straight cracked samples with the same geometries demonstrated that the discrepancy between the corresponding curves can be described with a good accuracy by a simple shift factor. In addition, using the extended maximum tangential strain criterion which takes into account the influence of both K (I) and T-stress terms, the statistical fracture toughness data of chevron notched specimens were predicted in terms of the Weibull distribution parameters of the straight cracked specimens.