...
首页> 外文期刊>Natural Hazards >Landslide susceptibility mapping by using statistical analysis in the North Anatolian Fault Zone (NAFZ) on the northern part of SuAYehri Town, Turkey
【24h】

Landslide susceptibility mapping by using statistical analysis in the North Anatolian Fault Zone (NAFZ) on the northern part of SuAYehri Town, Turkey

机译:土耳其苏耶镇北部地区北安纳托利亚断裂带(Nafz)统计分析的滑坡易感性映射

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The main purpose of this study is to obtain the landslide susceptibility mapping and compare the models of logistic regression (LR), analytical hierarchy process (AHP), and frequency ratio (FR) applied in a part of SuAYehri a long the North Anatolian Fault Zone (NAFZ, Sivas, Turkey). At first, a landslide inventory map was created from various sources such as aerial photographs, field studies, and satellite images. Then, the inventory map was randomly separated into an analysis dataset 65% for practicing the models, and the rest 35% was used for validation purpose. In analysis for landslide susceptibility, the following factors were used: lithology, slope aspect, topographical elevation, distance to stream, distance to roads, slope gradient, and distance to faults. To get speed and facility in our analysis, all descriptive and spatial information was entered into GIS system and consequently, landslide susceptibility maps were produced using models in GIS. At last for validation, the landslide susceptibility maps, the rest of the analysis dataset, which was not used in the modeling process, was considered and accomplished with operating characteristic curves and area under the curve. The results showed that the area under the curves obtained using the AHP, LR, and FR methods are 0.884, 0.837, and 0.835, respectively. In general, all three models were reasonably accurate. The resultant maps would be useful for regional spatial planning as well as for safe construction areas planning.
机译:本研究的主要目的是获得滑坡易感性映射,并比较北安托利亚故障区的一部分中施工的逻辑回归(LR),分析层次处理(AHP)和频率比(FR)的模型(Nafz,Sivas,土耳其)。起初,山体滑坡库存地图是从各种来源创建的,例如航拍照片,现场研究和卫星图像。然后,清单地图随机分离为65%的分析数据集,以便实践模型,其余35%用于验证目的。在分析滑坡易感性中,使用以下因素:岩性,坡面,地形高度,距离距离,与道路距离,坡度梯度和距离距离的距离。为了获得分析中的速度和设施,所有描述性和空间信息都输入了GIS系统,因此,使用GIS中的模型生产滑坡易感性图。最后用于验证,考虑并在建模过程中未使用的分析数据集的其余分析数据集,并通过曲线下的操作特性曲线和区域完成,实现了分析数据集的其余分析数据集。结果表明,使用AHP,LR和FR方法获得的曲线下的面积分别为0.884,0.837和0.835。通常,所有三种模型都是合理准确的。由此产生的地图对于区域空间规划以及安全建筑区域规划有用。

著录项

相似文献

  • 外文文献
  • 中文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号