首页> 外文期刊>Metals and Materials International >Effect of the Cr2O3 and TiO2 as Nucleating Agents in SiO2-Al2O3-CaO-MgO Glass-Ceramic System
【24h】

Effect of the Cr2O3 and TiO2 as Nucleating Agents in SiO2-Al2O3-CaO-MgO Glass-Ceramic System

机译:CR2O3和TiO2在SiO2-Al2O3-Cao-MgO玻璃 - 陶瓷系统中的成核剂

获取原文
获取原文并翻译 | 示例
           

摘要

The nucleation agent is one of the most important factors in glass-ceramics as it can control either the crystallization temperature or the activation energy. In this study, we investigated the effect of two common nucleation agents, TiO2 and Cr2O3, in the SiO2-Al2O3-CaO-MgO system. To determine the effect of TiO2 and Cr2O3 on nucleation, we measured the crystallization temperature by differential scanning calorimetry (DSC) scanning. To determine the activation energy of nucleation, the DSC scanning was made for the selected samples at various speeds. Also, the crystallinity of the selected sample was evaluated from the scattering intensity in X-ray diffractometry. Using DSC scanning, we found that TiO2 was effective in decreasing the crystallization temperature, while Cr2O3 was effective in decreasing the activation energy. We also performed nucleation heat treatment near the glass transition point. It is found that nucleation heat treatment was not effective in decreasing the crystallization temperature in our experimental condition. The XRD scattering method results showed that temperature is the key factor in crystallization and the effect of time is not as important.
机译:成核剂是玻璃陶瓷中最重要的因素之一,因为它可以控制结晶温度或激活能量。在这项研究中,我们研究了两种常见的成核剂,TiO2和Cr2O3在SiO 2-Al2O3-CaO-MgO系统中的作用。为了确定TiO2和Cr2O3对成核的影响,我们通过差示扫描量热法(DSC)扫描来测量结晶温度。为了确定成核的激活能量,在各种速度下对所选样品进行DSC扫描。而且,从X射线衍射法中的散射强度评价所选样品的结晶度。使用DSC扫描,我们发现TiO2在降低结晶温度时有效,而Cr2O3有效降低激活能量。我们还在玻璃过渡点附近进行了成核热处理。发现成核热处理在实验条件下降低结晶温度无效。 XRD散射方法结果表明,温度是结晶的关键因素,时间的效果并不重要。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号