...
首页> 外文期刊>Metallurgist >Plasma-ARC Heating of Periclase-Carbonaceous Refractory
【24h】

Plasma-ARC Heating of Periclase-Carbonaceous Refractory

机译:钙酶碳质耐火的等离子体弧加热

获取原文
获取原文并翻译 | 示例

摘要

Plasma-arc heating of periclase-carbonaceous refractory was experimentally tested. A high heating rate of 600A degrees C/h was achieved. The experimental results were used to correct the thermal characteristics of raw refractory and to determine the energy characteristics of the arc discharge. Raw periclase-carbonaceous refractory has high heat conductivity (25 W/(m center dot K)) and low emissivity (0.3). The radiated power (130 kW) of the discharge is calculated from spectral measurements of an argon plasma arc with a current of 1000 A and an arc voltage of 150 V. The obtained data are used to specify the parameters of the CFD-model of plasma-arc heating of periclase-carbonaceous refractory.
机译:经过实验测试蠕变 - 碳质耐火材料的等离子体弧加热。 实现了高加热速率为600A的C / H. 实验结果用于校正原始耐火的热特性,并确定电弧放电的能量特性。 生物纤维化酶 - 碳质耐火材料具有高导热率(25W /(中心点K))和低发射率(0.3)。 从氩等离子体弧的光谱测量计算放电的辐射功率(130kw),其电流为1000a和150 V的电弧电压。所获得的数据用于指定等离子体的CFD模型的参数 -ARC加热酸碱耐火材料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号