...
首页> 外文期刊>Materials Characterization >Microstructure and texture evolution of deformed Mg-Zn alloy during recrystallization
【24h】

Microstructure and texture evolution of deformed Mg-Zn alloy during recrystallization

机译:重结晶期间变形Mg-Zn合金的微观结构和纹理演化

获取原文
获取原文并翻译 | 示例
           

摘要

The microstructure and texture evolution of Mg-Zn alloy during recrystallization was investigated by EBSD in the present study. Deformed region, fine DRXed region and coarse DRXed region were obtained in Mg-Zn alloy during deformation. It was found that the texture intensity in DRXed region was weaker compared with the deformed region. The second phase at grain boundaries resulted in the formation of fine DRXed grains with weaker texture compared with the coarse DRXed region. Additionally, a remarkable grain-size driven textural transition from 10.0-11.0 texture to 11.0 texture were detected with the growth of DRXed grains. The recrystallized grains with small grain size showed a fiber texture distributing homogeneously between 10.0 and 11.0, while 11.0 fiber texture was predominant for the large recrystallized grains. It is suggested that 11.0 oriented grains grew faster than other oriented grains, which was ascribed to larger misorientation between 11.0 oriented grains and their neighboring grains.
机译:通过EBSD在本研究中研究了Mg-Zn合金在重结晶期间的微观结构和质地演化。在变形期间,在Mg-Zn合金中获得变形区域,细致区域和粗Drxed区域。发现,与变形区域相比,Drxed区域中的纹理强度较弱。晶界的第二阶段导致与粗糙的区域相比,形成细小的晶粒,与粗糙的区域相比较弱。另外,从&lt 19.0& - & 11.0&gt的显着粒度驱动纹理过渡。纹理到& 11.0&随着Drxed谷物的生长检测到纹理。具有小晶粒尺寸的重结晶晶粒显示纤维纹理在<10.0&gt之间均匀分布。和& 11.0&,而& 11.0&对于大型重结晶颗粒,纤维纹理是主要的。建议& 11.0&定向谷物增长速度比其他定向的晶粒快,这在<11.0&gt之间的较大误导性上均匀。定向谷物及其邻近的谷物。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号