首页> 外文期刊>Fuel Processing Technology >Operation characteristics of external heat exchangers in the 600 MW supercritical CFB boiler
【24h】

Operation characteristics of external heat exchangers in the 600 MW supercritical CFB boiler

机译:600 MW超临界CFB锅炉外用换热器的操作特性

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, experiments were carried out to obtain the actual operation characteristics of external heat exchangers (EHEs) in the first 600 MW supercritical CFB boiler. The furnace temperatures and some operational parameters in EHEs were measured and the heat transfer coefficients of heating surfaces in EHEs were calculated. The results showed that by controlling the solid flow rates to the EHEs, the furnace temperature were adjusted for good performance at various boiler loads and the bed temperature were maintained stable at full load. The heat transfer coefficients in EHEs were mostly over 200 W/(m(2).K), which contributed to the flexible temperature regulation. The tube panel wall temperatures were found to be a saddle-shaped distribution, which was high in the bed center but low near the wall. Packet renewal theory was used to explain such uneven temperature distribution. These results confirm the importance of EHEs to the furnace temperature control of the supercritical CFB boilers, but the uneven tube wall temperatures need to be well solved in the future.
机译:在本文中,进行了实验,以获得前600 MW超临界CFB锅炉中外热交换器(嘴)的实际操作特性。测量炉温炉温度和一些操作参数,并计算锥形中加热表面的传热系数。结果表明,通过将固体流速控制到锥形,在各种锅炉负荷下调节炉温,在各种锅炉载荷下进行良好的性能,并且在满载时保持床温稳定。锥形中的传热系数大多超过200 w /(m(2).k),这有助于柔性温度调节。发现管面板壁温度是鞍形分布,在床中心高,但靠近墙壁。数据包更新理论用于解释这种不平坦的温度分布。这些结果证实了渗透到超临界CFB锅炉炉温控制的重要性,但不均匀的管壁温度需要在未来很好地解决。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号