首页> 外文期刊>Food analytical methods >Solid-Phase Extraction Combined with Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Droplet for Simultaneous Determination of Organochlorine Pesticides and Polychlorinated Biphenyls in Fish
【24h】

Solid-Phase Extraction Combined with Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Droplet for Simultaneous Determination of Organochlorine Pesticides and Polychlorinated Biphenyls in Fish

机译:基于浮动有机液滴凝固的固相萃取结合分散液 - 液微萃取,同时测定鱼类中有机氯农药和多氯联苯

获取原文
获取原文并翻译 | 示例
           

摘要

Solid-phase extraction (SPE) was combined with dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO) as a pretreatment technique for the simultaneous analysis of 11 organochlorine pesticides (OCPs) and 5 polychlorinated biphenyls (PCBs) in fish tissue. Gas chromatography with electron capture detector was used for the identification and quantification of these compounds. In the newly developed method, the acetonitrile extractant of the fish sample was cleaned up by commercialized SPE cartridges packed with acid alumina, and then mixed with water, sodium-chloride, and n-pentadecane for the purpose of target analyte enrichment via DLLME-SFO process. Effect of the parameters including SPE packing material, amount and chemical nature of extraction solvent, water volume, and salt concentration on the signal responses were investigated, and the recoveries of this method ranged between 70.1% and 112.3% at three spiked levels under the optimized conditions. The calibration curves were found to be linear in the range of 1.56-312.5 mu g L-1, and the limits of detection ranged from 0.372 to 1.12 mu g kg(-1). Comparing the other reported pretreatment method, the presented one was sensitive, time-saving, and environmentally friendly.
机译:基于漂浮有机液滴(DLLME-SFO)的固化,将固相萃取(SPE)与分散液 - 液体微萃取合并作为浮动有机液滴(DLLME-SFO)作为预处理技术,用于同时分析11种有机氯杀虫剂(OCP)和5种多氯联苯(PCB)鱼组织。使用电子捕获检测器的气相色谱法用于这些化合物的鉴定和定量。在新开发的方法中,通过用酸性氧化铝包装的商业化SPE盒清除了鱼样品的乙腈萃取剂,然后与水,氯化钠和正戊烷混合,以通过DLLME-SFO靶向氧化过程。研究了提取溶剂,水体积和盐浓度的SPE包装材料,量和化学性质的参数的影响,并在优化的三个尖刺水平下,该方法的回收率范围为70.1%至112.3%。状况。发现校准曲线在1.56-312.5μmg l-1的范围内是线性的,并且检测限范率为0.372至1.12μgkg(-1)。比较其他报道的预处理方法,所提出的一个是敏感,节省时间和环保的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号