首页> 外文期刊>Advances in Applied Ceramics >Pressureless sintering of gelcast ZTA-MgO-TiO_2 systems as potential dental ceramics
【24h】

Pressureless sintering of gelcast ZTA-MgO-TiO_2 systems as potential dental ceramics

机译:凝胶浇铸ZTA-MgO-TiO_2系统的无压烧结作为潜在的牙科陶瓷

获取原文
获取原文并翻译 | 示例
           

摘要

The pressureless sintering behaviour of gelcast zirconia toughened alumina (ZTA) containing the total 5 wt-% additives of MgO and TiO_2 was investigated. The effects of four combinations of MgO and TiO_2 on the bulk properties, morphology and phase composition of the ZTA composites were evaluated in comparison with pure ZTA in the temperature range of 1150-1600°C. Four combinations of MgO and TiO_2 initiated effective densification and enhancement at 1450°C, as indicated by the relative density and three-point bending strength measurements and fracture morphological observations by using scanning electron microscopy. X-ray diffraction analyses confirmed that the difference in the bending strength among four groups of ZTA composites was due to the MgO dependent formation of minor MgAI_2O_4 and TiO_2 induced polymorphic transformation of tetragonal phase to monoclinic ZrO_2. These results are useful to further develop dental ceramics, including glass infiltrated ZTA.
机译:研究了包含总计5 wt%的MgO和TiO_2添加剂的凝胶浇铸氧化锆增韧氧化铝(ZTA)的无压烧结行为。在1150-1600°C的温度范围内,与纯ZTA相比,评估了MgO和TiO_2四种组合对ZTA复合材料的整体性能,形貌和相组成的影响。 MgO和TiO_2的四种组合在1450°C时开始有效的致密化和增强,这是通过使用扫描电子显微镜进行的相对密度和三点弯曲强度测量以及断裂形态观察所表明的。 X射线衍射分析证实四组ZTA复合材料的抗弯强度差异是由于MgO依赖形成的次要MgAl_2O_4和TiO_2诱导的四方相向单斜ZrO_2的多晶型转变。这些结果对于进一步开发包括玻璃渗透ZTA在内的牙科陶瓷很有用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号