Effect of different deformation and annealing procedures on non-magnetic textured Cu 60Ni 40 alloy substrates

摘要

In this work, a series of specimens was prepared by the casting method. Sharp cube-textured substrates were processed by heavy cold rolling and recrystallization annealing (i.e., the rolling-assisted biaxially textured substrates (RABiTS) method). Both the rolling and the recrystallization texture in the alloy tapes were investigated by X-ray diffraction and electron back-scatter diffraction, respectively. The results showed that a strong copper-type deformation texture was obtained in the heavy cold-rolled substrate. In addition, the recrystallization annealing process was found to be very important for the texture transition in the Cu–Ni alloy substrates. The cube texture content in the Cu~(60)Ni~(40)alloy substrates reached 99.7% (≤10°) after optimization of the cold-rolling procedure and the recrystallizing heat-treatment process, whereas the content of low-angle grain boundaries (from 2° to 10° misorientation) in the substrate reached 95.1%.