首页> 外文期刊>Biosystems Engineering >Dust explosions in an experimental test silo: Influence of length/diameter ratio on vent area sizes
【24h】

Dust explosions in an experimental test silo: Influence of length/diameter ratio on vent area sizes

机译:实验性筒仓中的粉尘爆炸:长度/直径比对通风口面积的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Vented dust explosion tests have been conducted in an experimental test silo in order to analyse the effect of the length/diameter ratio (L/D). The modular design of the silo permitted the assembling of four different vessels with different geometries. The tests were carried out with wheat flour and maize starch, using three different vent area sizes. The silo was equipped with instrumentation which recorded the pressure generated by the explosion at various points in the silo, as well as the instant when the vent panel opened. The length/diameter ratio has been included in the empirical correlations currently employed in standards EN 14491 and NFPA 68 for calculating the size of vents. However, there are marked differences between the two standards when applied to certain situations, in part due to a different vent area correction for slenderness. The results obtained in this experimental test programme were compared with the standards, and indicated the advisability of applying an increase in vent area in elongated vessels when L/D > 1, as stated in EN 14491. However, this same standard appears to apply an excessively severe correction in some situations. (C) 2016 IAgrE. Published by Elsevier Ltd. All rights reserved.
机译:已在实验测试筒仓中进行了通风式粉尘爆炸测试,以分析长度/直径比(L / D)的影响。筒仓的模块化设计允许组装四个具有不同几何形状的不同容器。使用三种不同的排气口尺寸,对小麦粉和玉米淀粉进行了测试。筒仓配备了仪器,可以记录筒仓内各个点爆炸产生的压力以及排气面板打开的瞬间。长度/直径比已包含在标准EN 14491和NFPA 68中当前用于计算通风口尺寸的经验相关性中。但是,在某些情况下,两种标准之间存在明显差异,部分原因是针对细长度的通风口校正不同。在该实验测试程序中获得的结果与标准进行了比较,表明当L / D> 1时,应在细长容器中增加通风面积,如EN 14491所述。但是,该标准似乎适用于在某些情况下,矫正过度。 (C)2016年。由Elsevier Ltd.出版。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号