Thermal treatment of pyrolytic lignin and polyethylene terephthalate toward carbon fiber production

摘要

In this work, pyrolytic lignin (PL) was thermally co-treated with polyethylene terephthalate (PET) to produce carbon fiber precursor. The produced PL-PET precursors were thoroughly characterized and analyzed, and then being processed into carbon fiber. It was found that a novel precursor, rather than their physical blending, was formed by the thermal co-treatment, indicating there were strong interactions between PL and PET. The novel PL-PET precursors had enhanced thermal properties and rheological characteristics, therefore are more suitable for processing into better carbon fibers based on melt-spinning method. In this study, the precursor fibers derived from the co-treatment of PL and 5% PET were also stretched under tension during stabilization step to reduce the fiber diameter and improve molecular orientation. The resulting carbon fibers with an average diameter of 12.6 mu m had the tensile strength of up to 1220 MPa. This work demonstrated that PET could be used to improve the processability and quality of lignin-based carbon fiber when it is chemically bonded with lignin-based precursor. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 137, 48843.