...
首页> 外文期刊>Scripta materialia >Effect of heating rate during primary crystallization on soft magnetic properties of melt-spun Fe-B alloys
【24h】

Effect of heating rate during primary crystallization on soft magnetic properties of melt-spun Fe-B alloys

机译:初级结晶期间加热速率对熔融纺溶Fe-B合金软磁特性的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The structural and magnetic properties of amorphous Fe-87 - yB13Cuy (y = 0 to 1.5) annealed with a range of heating rates (a) up to 150 K/s were investigated. The lowest coercivity (H-c) for Fe87B13 after crystallization shows a dramatic decrease from 174 A/m to 6.7 A/m when a is increased from 1.7 K/s to 150 K/s. The coercivity of Fe-87 - yB13Cuy annealed at 150 K/s is reduced by Cu addition and H-c = 3.0 A/m is obtained at y = 1.5. Nano structures with a grain size of 15 to 20 nm were evident in transmission electron micrographs from these rapidly annealed alloys. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
机译:研究了用一系列加热速率(a)的无定形Fe-87 - Yb13Cuy(Y = 0至1.5)的结构和磁性,高达150 k / s。 结晶后Fe87b13的最低矫顽力(H-C)显示出从1.7 k / s增加至150 k / s时从174A / m至6.7a / m的显着降低。 在150 k / s以150k / s退火的Fe-87 - Yb11Cuy的矫顽力通过Cu加成而减少,在Y = 1.5处获得H-C = 3.0A / m。 晶粒尺寸为15至20nm的纳米结构在来自这些快速退火的合金的透射电子显微照片中是明显的。 (c)2017 Acta Materialia Inc. elsevier有限公司出版。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号