End-pumped Nd:YVO4 laser with reduced thermal lensing via the use of a ring-shaped pump beam

摘要

A simple approach for alleviating thermal lensing in end-pumped solid-state lasers using a pump beam with a ring-shaped intensity distribution to decrease the radial temperature gradient is described. This scheme has been implemented in a diode-end-pumped Nd:YVO4 laser yielding 14 W of TEM00 output at 1.064 mu m with a corresponding slope efficiency of 53% and a beam propagation factor (M-2) of 1.08 limited by available pump power. By comparison, the same laser design with a conventional quasi-top-hat pump beam profile of approximately equal radial extent yielded only 9 W of output before the power rolled over due to thermal lensing. Further investigation with the aid of a probe beam revealed that the thermal lens power was similar to 30% smaller for the ring-shaped pump beam compared to the quasi-top-hat beam. The implications for further power scaling in end-pumped laser configurations are considered. (C) 2017 Optical Society of America.