AbstractThe present work submits an investigation about the effect of urea injection parameters on NO<'/> Experimental investigation of urea injection parameters influence on NO <Subscript>x</Subscript> emissions from blended biodiesel-fueled diesel engines
首页> 外文期刊>Environmental Science and Pollution Research >Experimental investigation of urea injection parameters influence on NO x emissions from blended biodiesel-fueled diesel engines
【24h】

Experimental investigation of urea injection parameters influence on NO x emissions from blended biodiesel-fueled diesel engines

机译:尿素注射参数对NO <下标> X /下标>燃料柴油发动机排放影响的实验研究

获取原文
获取原文并翻译 | 示例
           

摘要

AbstractThe present work submits an investigation about the effect of urea injection parameters on NOxemissions from a four-stroke four-cylinder diesel engine fueled with B20 blended biodiesel. An L9(34) Taguchi orthogonal array was used to design the test plan. The results reveal that increasing urea concentration leads to lower NOxemissions. Urea flow rate increment has the same influence on NOxemission. The same result is obtained by an increase in spray angle. Also, according to the analysis of variance (ANOVA), urea concentration and then urea flow rate are the most effective design parameters on NOxemissions, while spray angle and mixing length have less influence on this pollutant emission. Finally, since the result of confirmation test is in good agreement with the predicted value based on the Taguchi technique, the predictive capability of this method in the present study could be deduced.]]>
机译: x 用B20混纺生物柴油的四冲程四缸柴油发动机排放的注射参数。 L <下标> 9 (3 4 )taguchi正交阵列用于设计测试计划。结果表明,增加尿素浓度导致不降低<下标> x 排放。尿素流量增量对NO <下标> x 发射具有相同的影响。通过增加喷射角来获得相同的结果。此外,根据方差(ANOVA)的分析,尿素浓度,然后尿素流速是NO <下标> x 排放中最有效的设计参数,而喷射角度和混合长度对该污染物发射的影响较小。最后,由于确认测试的结果与基于Taguchi技术的预测值良好,因此可以推导出本研究中该方法的预测能力。 ]]>

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号