首页> 外文期刊>Electrochimica Acta >Archiving high-performance solid oxide fuel cells with titanate anode in sulfur- and carbon-containing fuels
【24h】

Archiving high-performance solid oxide fuel cells with titanate anode in sulfur- and carbon-containing fuels

机译:归档高性能固体氧化物燃料电池,含碳燃料和含碳燃料中的钛酸盐阳极

获取原文
获取原文并翻译 | 示例
           

摘要

Yttria doped strontium titanate (Y0.07Sr0.89TiO3, YST) material is synthesized using a conventional combustion method as anode for solid oxide fuel cells (SOFCs) in sulfur-and hydrocarbon-containing fuels. The YST perovskite exhibits good stability and chemical compatibility with yttria stabilized zirconia (YSZ) electrolyte in 0.5% H2S-containing fuel at high temperatures. Moreover, the YST shows high electrical conductivity of 35 S cm(-1) at 900 degrees C and the cell with this anode achieves a maximum power density of 200, 162 and 70 mW cm(-2) when the anode is fed by 0.5% H2S-containing hydrogen, syngas and methane fuels, respectively. More importantly, the cell shows negligible degradation in the sulfur-, carbon-and hydrocarbon-containing fuels. Thus, YST holds the promise as anode material for SOFCs, especially in high concentration sulfur-, carbon-and hydrocarbon-containing fuels. (c) 2018 Elsevier Ltd. All rights reserved.
机译:使用常规的燃烧方法作为亚硫和含烃燃料中的固体氧化物燃料电池(SOFC)的阳极合成YTTRIA掺杂钛酸锶(Y0.07SR0.89TIO3,YST)材料。 YST Perovskite在高温下在0.5%H 2 S的燃料中表现出良好的稳定性和化学相容性,在含0.5%H 2 S的燃料中稳定稳定的氧化锆(YSZ)电解质。 此外,当阳极被送入0.5时,YST显示在900摄氏度(-1)的高电导率为35℃(-1)的电导率为35℃(-1),并且电池达到200,162和70mm(-2)的最大功率密度 分别含H 2 S的氢,合成气和甲烷燃料。 更重要的是,细胞显示含硫,含碳和烃燃料中可忽略的降解。 因此,YST保持了作为SOFCs的阳极材料的承诺,特别是在高浓度的硫 - ,含碳和含烃燃料中。 (c)2018年elestvier有限公司保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号