...
首页> 外文期刊>Electrochimica Acta >Corrosion behavior and product film formation of Ni-Co-Cu nanocrystalline coatings in neutral salt environments
【24h】

Corrosion behavior and product film formation of Ni-Co-Cu nanocrystalline coatings in neutral salt environments

机译:中性盐环境中Ni-Cu-Cu纳米晶涂层的腐蚀行为和产物膜形成

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The corrosion behavior of Ni-Co-Cu nanocrystalline coatings in neutral salt environments was systematically investigated by potentiodynamic polarization, linear polarization, electrochemical impedance spectroscopy, and long-term salt spray tests. The electrodeposited ternary coatings were Ni-based solid solution alloys that contained markedly different contents of Co and Cu. Greater Co and Cu contents strongly reduced the polarization and charge-transfer resistance of the coatings, thus decreasing their corrosion resistance in neutral NaCl solutions. In salt spray tests, the initial porous corrosion product film on the Co-/Cu-poor coating evolved into a compact film that finally grew to cover the coating surface, while such morphological transition was absent on the Co-/Cu-rich coating, where the formed film showed a continuous deterioration in its initial porous structure. Abundant Co-/Cu-substituted alpha-Ni(OH)(2) might grow to form the primary compact films that could coalesce and thicken as corrosion was suppressed. A large amount of Cu(OH)(2) together with high corrosion rates might be detrimental to the formation of compact films. A mechanism of the formation of the corrosion product films was proposed based on the corrosion characteristics of the ternary system and detailed corrosion product film analysis. (C) 2018 Elsevier Ltd. All rights reserved.
机译:通过电压极化,线性极化,电化学阻抗光谱和长期盐雾试验系统地研究了中性盐环境中Ni-Cu-Cu纳米晶涂层的腐蚀行为。电沉积的三元涂层是Ni的固体溶液合金,其含有明显不同的Co和Cu的含量。更大的CO和Cu含量强烈降低涂层的偏振和电荷转移电阻,从而降低了它们在中性NaCl溶液中的耐腐蚀性。在盐雾试验中,初始多孔腐蚀产物膜在Co-/ Cu-差的涂层上演化到紧凑的膜中,最终成长以覆盖涂层表面,而这种形态转变在富含共/ Cu的涂层上不存在这种形态转变,在形成的薄膜在其初始多孔结构中显示出连续劣化的情况下。丰富的Co-/ Cu-取代的α-Ni(OH)(2)可以生长以形成可以聚结的主要紧凑型膜,因为腐蚀被抑制腐蚀。大量Cu(OH)(2)与高腐蚀速率一起可能对形成紧凑型膜的形成是有害的。基于三元系统的腐蚀特性和细化的腐蚀产品薄膜分析,提出了一种腐蚀产物膜的形成机理。 (c)2018年elestvier有限公司保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号