首页> 外文期刊>Journal of Materials Science >High-pressure homogenization treatment of Al-Zn-Mg-Cu aluminum alloy
【24h】

High-pressure homogenization treatment of Al-Zn-Mg-Cu aluminum alloy

机译:Al-Zn-Mg-Cu铝合金的高压均质处理

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The microstructures and aging hardening response of Al-12Zn-3.5Mg-3.0Cu-0.14Zr aluminum alloy after a high-pressure homogenization treatment at 750 degrees C for 45 min under 5 GPa were investigated. The results showed that the constituent phases dissolved completely and formed alpha-Al single-phase solid solution comparable to that formed after ambient-pressure homogenization at 450 degrees C/96 h + 460 degrees C/128 h. The complete dissolution of the constituent phases increased the solubility of the alloying elements, as well with the over-burning temperature and aging hardness.
机译:研究了Al-12Zn-3.5Mg-3.0Cu-0.14Zr铝合金在750 G,5 GPa下高压均质处理45 min后的组织和时效硬化响应。结果表明,组成相完全溶解,形成的α-Al单相固溶体与在450℃/ 96 h + 460℃/ 128 h的环境压力均质后形成的固相相当。组成相的完全溶解增加了合金元素的溶解度,以及过度燃烧温度和时效硬度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号