Properties of molded soy protein isolate plastics

摘要

Thermal property of soy protein isolates (SPI) was studied with differential scanning calorimetry and thermogravimetric analysis. The weight loss of pure is about 300 degrees C. The glass transition temperature (T-g) is above 200 degrees C. The best molding temperature of glycerin plasticized SPI plastics were then given. It is between 125 and 140 degrees C. Subsequently the special property of molded SPI plastics was investigated. Results show that the atmosphere humidity affects the mechanical property and thermal property of SPI plastics. With the increasing humidity, the tensile strength decreases. While the elongation at breakage and peak area of the differential scanning calo- rimetry curve increases. At high temperature even at 140 degrees C the molding temperature SPI plastics still have tensile strength though it decreases with the increasing test temperature while elongation at breakage increases. Dynamic mechanic thermal analysis test show that the storage modulus decreases with the rising temperature. The mechanical loss peak appears at lower temperature with the increasing amount of glycerin content.