...
首页> 外文期刊>Journal of Applied Polymer Science >EMULSION POLYMERIZATION OF METHYL METHACRYLATE IN CONCENTRATIONS OF EMULSIFIERS BELOW THEIR CMCS - POLYMERIZATION RATE, PARTICLE SIZE, AND PARTICLE-SIZE DISTRIBUTION
【24h】

EMULSION POLYMERIZATION OF METHYL METHACRYLATE IN CONCENTRATIONS OF EMULSIFIERS BELOW THEIR CMCS - POLYMERIZATION RATE, PARTICLE SIZE, AND PARTICLE-SIZE DISTRIBUTION

机译:低于CMCS的乳化剂中甲基丙烯酸甲酯的乳液聚合-聚合速率,颗粒尺寸和颗粒尺寸分布

获取原文
获取原文并翻译 | 示例
           

摘要

The emulsion polymerization of methyl methacrylate (MMA) in concentrations of emulsifiers below their critical micelle concentrations (CMCs) initiated by K2S2O8 (KPS) was studied. It was observed that the initiator concentration has little effect on both polymerization rate and particle size. However, the polymerization rate is faster and particle size is smaller obviously when decreasing the ratio of the water/monomer or increasing the temperature of polymerization or the amount of the emulsifier. In the range of a 200-400 rpm stirring speed, the polymerization rate is almost unchanged although the particle size becomes larger with increase in the stirring speed. The monodisperse particle (size about 100-200 nm) can be obtained using this process. The mechanism of emulsion polymerization of MMA in the emulsifier concentration below its CMC is discussed. (C) 1995 John Wiley and Sons, Inc. [References: 4]
机译:研究了由K2S2O8(KPS)引发的低于其临界胶束浓度(CMCs)的乳化剂浓度的甲基丙烯酸甲酯(MMA)的乳液聚合。观察到引发剂浓度对聚合速率和粒径均几乎没有影响。然而,当降低水/单体的比例或提高聚合温度或乳化剂的量时,聚合速率更快且粒度明显更小。在200-400rpm的搅拌速度范围内,尽管随着搅拌速度的增加粒度变大,但聚合速率几乎不变。使用该方法可以获得单分散颗粒(尺寸为约100-200nm)。讨论了乳化剂浓度低于其CMC时MMA乳液聚合的机理。 (C)1995 John Wiley and Sons,Inc. [参考:4]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号