Removal of methylene blue from aqueous solution by Artist's Bracket fungi: kinetic and equilibrium studies

摘要

In this study, adsorption of methylene blue (MB) dye onto Artist's Bracket (AB) fungi was investigated in aqueous solution. Fourier transform infrared and scanning electron microscopy were used to investigate surface characteristic of AB fungi. Influence of operational parameters such as pH, contact time, biosorbent dosage, dye concentration, inorganic salts and temperature was studied on dye removal efficiency. With the increase of pH from 3 to 9, removal efficiency increased from 74.0% to 90.4%. Also, it reduced from 99.8% to 81.8% with increasing initial MB concentration from 25 mg L-1 to 100 mg L-1, whereas it increased from 54.7% to 98.7% and from 98.5% to 99.9% with increasing biosorbent dosage from 0.5 g L-1 to 2 g L-1 and with increasing temperature from 25 degrees C to 50 degrees C, respectively. Isotherm studies have shown adsorption of MB dye over the AB fungi had a better coefficient of determination (R-2) of 0.98 for Langmuir isotherm. In addition, the maximum monolayer adsorption capacity (q(m)) was 100 mg g(-1) Also, the MB dye adsorption process followed pseudo-second-order kinetic. In general, AB fungi particles can be favorable for removal of MB dye from dye aqueous solution with natural pH and high temperature.