首页> 外文期刊>Surface & Coatings Technology >Microstructure and tribological property of HVOF-sprayed adaptive NiMoAl–Cr_3C_2–Ag composite coating from 20 °C to 800 °C
【24h】

Microstructure and tribological property of HVOF-sprayed adaptive NiMoAl–Cr_3C_2–Ag composite coating from 20 °C to 800 °C

机译:HVOF喷涂自适应NiMoAl–Cr_3C_2–Ag复合涂层在20°C至800°C范围内的显微组织和摩擦学性能

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Adaptive NiMoAl–Cr_3C_2–Ag composite coating was deposited by high velocity oxy-fuel (HVOF) spraying and its tribological properties from20 °C to 800 °C under unlubricated conditionswere evaluated. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectroscopywere used to characterize the coating and corresponding wear tracks to determine the lubrication mechanisms. The results showed that HVOF-sprayed composite coating exhibited an extremely dense structure, high bonding strength, and excellent friction reduction and wear resistance. When the applied load is 15 N, friction coefficients of the composite coating were below 0.3 and wear rates maintained at the order of 10~(?6)mm~3/N·m except 400 °C. Post-wear testing structural and chemical characterization revealed that silver with low shear strength provided lubrication below 400 °C. Subsequently, the composite coating suffered serious adhesionwear at 400 °C, nevertheless, the adhesive degree could be greatly alleviated at a lower applied load. At higher temperatures, silver molybdate that was formed through tribo-chemistry reactions acted as high temperature lubricants.
机译:通过高速氧-燃料(HVOF)喷涂沉积了自适应NiMoAl–Cr_3C_2–Ag复合涂层,并评估了在无润滑条件下从20°C到800°C的摩擦性能。扫描电子显微镜(SEM),X射线衍射(XRD)和拉曼光谱用于表征涂层和相应的磨损轨迹,以确定润滑机理。结果表明,喷涂HVOF的复合涂层具有极致密的结构,高的粘结强度以及优异的减摩性和耐磨性。当施加的载荷为15N时,复合涂层的摩擦系数低于0.3,并且除400℃外,磨损率保持在10〜(≤6)mm〜3 / N·m的数量级。磨损后测试的结构和化学特性表明,低剪切强度的银在400°C以下提供润滑。随后,该复合涂层在400℃下遭受严重的粘附磨损,但是,在较低的施加负荷下可以大大降低粘附度。在较高温度下,通过摩擦化学反应形成的钼酸银充当高温润滑剂。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号