首页> 外文期刊>Surface & Coatings Technology >Ni-Bi composite coatings produced by ionic co-discharge electrodeposition
【24h】

Ni-Bi composite coatings produced by ionic co-discharge electrodeposition

机译:离子共放电电沉积制备的Ni-Bi复合涂层

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Composite coatings are widely used in applications due to their excellent mechanical properties and long service life. Most recent studies have been conducted using the co-deposition of metal with oxides or ceramic particles to produce composite coatings. However, the investigation of the co-deposition of two phases is rare. In this research, composite coatings of two phases (Ni and NiBi) were synthesized by the co-ionic discharge method. Direct current was used to produce Ni and Ni-Bi composite coatings where the Ni coating was produced for comparison purposes. After adding Bi into Ni coating, a more compact coating with smoother surface was obtained. The hardness and wear resistance of the coatings were also improved due to the incorporation of Bi into the Ni coating matrix. There was no significant difference between the corrosion properties of Ni and Ni-Bi composite coatings. The levels of the corrosion current densities and corrosion potentials were in the same range. (C) 2014 Elsevier B.V. All rights reserved.
机译:复合涂料由于其优异的机械性能和较长的使用寿命而广泛用于各种应用中。使用金属与氧化物或陶瓷颗粒的共沉积来生产复合涂层已经进行了最近的研究。但是,很少研究两相的共沉积。在这项研究中,通过离子放电法合成了两相(Ni和NiBi)复合涂层。直流电用于生产Ni和Ni-Bi复合镀层,其中生产Ni镀层用于比较。将Bi添加到Ni涂层中后,可以获得更致密的表面光滑的涂层。由于将Bi掺入Ni涂层基体中,因此涂层的硬度和耐磨性也得到了改善。 Ni和Ni-Bi复合涂层的腐蚀性能之间没有显着差异。腐蚀电流密度和腐蚀电位的水平在相同范围内。 (C)2014 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号