...
首页> 外文期刊>Polymer: The International Journal for the Science and Technology of Polymers >The study of room-temperature stretching of annealed polypropylene cast film with row-nucleated crystalline structure
【24h】

The study of room-temperature stretching of annealed polypropylene cast film with row-nucleated crystalline structure

机译:行晶形退火聚丙烯流延膜的室温拉伸研究

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The room-temperature stretching process of polypropylene annealed film with row-nucleated crystalline structure was studied by in-situ small-angle X-ray scattering (SAXS) setup and off-line wide-angle X-ray scattering (WAXS), temperature-modulated differential scanning calorimetry (TMDSC) and stressestrain curves testing. The formation process of initial connecting bridges and pores was clarified. For the annealed film, except for the initial lamellae structure, the recrystallized part formed by the melting and crystallization of imperfect crystals during annealing, tie chains connecting the lamellae structure among the amorphous region, secondary crystals from the crystallization of tie chains during annealing and daughter crystals from the special cross-hatched crystalline structure of PP coexist. It was found that 10% stretching lead to the pronounced increase of long period and the appearance of a few initial connecting bridges. The stretching of daughter crystal and recrystallized part contributed to the formation of initial bridges. At stretching ratio of 30%, uniform distributed connecting bridges were observed and the stretched film showed maximum structure periodicity. At this stretching ratio, except for the stretching of daughter crystal, the stretching of tie chains and secondary crystals within the amorphous region lead to the formation of more connecting bridges. At higher stretching ratios into the strain-hardening region and beyond the second yield point, except for the stretching of the above mentioned crystalline and amorphous structure, the stretching of mother lamellae occurred and lamellae deformation was inevitable, resulting in lower structure periodicity. During room-temperature stretching, the pores were formed progressively and the stretching ratio of 30%, situated at the transition point from plastic plateau to strain-hardening region in the stressestrain curves, was appropriate for the initiation of pores. (C) 2016 Elsevier Ltd. All rights reserved.
机译:通过原位小角X射线散射(SAXS)装置和离线广角X射线散射(WAXS),研究了具有行成核晶体结构的聚丙烯退火膜的室温拉伸过程。调制差示扫描量热法(TMDSC)和应力应变曲线测试。阐明了初始连接桥和孔的形成过程。对于退火膜,除了初始的层状结构外,退火过程中由不完善的晶体熔化和结晶形成的重结晶部分,在非晶区之间连接层状结构的连接链,退火期间的连接链结晶产生的次级晶体和子晶PP的特殊交叉影线晶体结构共存。发现10%的拉伸导致长时间的显着增加和一些初始连接桥的出现。子晶体和重结晶部分的拉伸有助于初始桥的形成。在拉伸比为30%时,观察到均匀分布的连接桥,并且拉伸膜显示出最大的结构周期性。在该拉伸比下,除了子晶体的拉伸之外,无定形区域内的键链和次级晶体的拉伸导致形成更多的连接桥。在进入应变硬化区域且高于第二屈服点的拉伸比较高时,除了上述晶体和非晶结构的拉伸外,母片发生拉伸并且不可避免地发生片变形,从而导致较低的结构周期性。在室温拉伸过程中,逐渐形成孔,并且在应力-应变曲线中位于从塑性高原到应变硬化区的过渡点的30%的拉伸比适合于孔的产生。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号