...
首页> 外文期刊>Polymer: The International Journal for the Science and Technology of Polymers >Environmentally adaptable pathway to emulsion polymerization for monodisperse polymer nanoparticle synthesis
【24h】

Environmentally adaptable pathway to emulsion polymerization for monodisperse polymer nanoparticle synthesis

机译:乳液聚合的环境适应途径,用于单分散聚合物纳米颗粒的合成

获取原文
获取原文并翻译 | 示例
           

摘要

An environmentally adaptable method is proposed for emulsion polymerization to produce monodisperse polymer nanoparticles at surfactant concentrations much lower than conventional emulsion polymerization. The present method is based on an idea of employing a surfactant with a low critical micelle concentration (CMC) to generate a large number of polymer particles in the presence of micelles at low surfactant concentrations and to cease the particle generation by the micelle disappearance in early reaction stage for attainment of high monodispersity of particles. A hydrophobic monomer of styrene (St) and a less hydrophobic monomer of methyl methacrylate (MMA) were used in the present emulsion polymerization at a total monomer concentration of 0.3 M with an initiator of ammonium persulfate (APS) and a long alkyl chain surfactant of sodium octadecyl sulfate (SOS). The polymerization was conducted at a high APS concentration of 20 mM that gave the CMC as low as 0.085 mM for SOS. An increase in the monomer mole fraction of MMA increased the number of polymer particles, while the high monomer mole fraction of MMA failed to stabilize the dispersion of particles. The polymerization for a monomer ratio of St/MMA = 1/1 could produce monodisperse polymer particles of 33 nm at a surfactant concentration of 1 mM that was higher than its CMC (0.085 mM) but much lower than several ten mM of surfactant concentrations in conventional emulsion polymerization. (C) 2015 Elsevier Ltd. All rights reserved.
机译:提出了一种环境适应性方法用于乳液聚合,以比传统乳液聚合低得多的表面活性剂浓度生产单分散聚合物纳米颗粒。本方法基于以下思想:使用低临界胶束浓度(CMC)的表面活性剂在低表面活性剂浓度的胶束存在下产生大量聚合物颗粒,并通过早期的胶束消失来停止颗粒的产生。达到高单分散性的反应阶段。在本发明乳液聚合中,使用过硫酸铵引发剂(APS)和长烷基链表面活性剂的总单体浓度为0.3 M时,苯乙烯的疏水单体和甲基丙烯酸甲酯的疏水性较低的单体用于本乳液聚合中。十八烷基硫酸钠(SOS)。聚合在20 mM的高APS浓度下进行,这使得SOS的CMC低至0.085 mM。 MMA的单体摩尔分数的增加增加了聚合物颗粒的数量,而MMA的高单体摩尔分数未能稳定颗粒的分散。单体比例为St / MMA = 1/1的聚合可以在表面活性剂浓度为1 mM时产生33 nm的单分散聚合物颗粒,该表面活性剂浓度高于其CMC(0.085 mM),但远低于表面活性剂浓度的几十个mM。常规乳液聚合。 (C)2015 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号